Technical Canister Led lights for Cave and technical dives

During the development of our lights we had to take many attitudes to suit the expectation of the divers. The reliability was the most important requirement, a general light has to be reliable in any case.

Pressure-tight test

The increasing of the diving depth consequently pressure change is simulated in a testchamber might as well until 200 meters. (656 feet) The chamber in which we can test our light’s maximal diving depth.

Running improvements

The echoes and the experiences of the divers are very important for us but partly we can put together the necessary changes on the next serial lights.

Elasticity

Of course we try to solve any requests; we may meet special claims as well, if somebody needs a piece production light. Video lights etc.

We are looking for dealers on the American and on the European countries

 

SE-3 technical light

- 750 Lumen emitter output

- 2.4 ah battery capacity

- 180 min burn time

- Maximal depth rating: 100 metres

- weight: 1.4 kg

- 6ْ beam angles

- Nimh battery

- Correlated colour temperature of the LED-s typ. 5500k Max. 10000k

With this light your dives could take for a long time. The advantages are its extraordinary small size and its light weight. This light is commendable for all the divers and not only for technical dives.

 

SE-3 Long (long battery pack) technical light

- 750 Lumen emitter output

- 4.8 ah battery capacity

- 360 min burn time

- Maximal depth rating: 100metres

- weight:1.9 kg

- 6ْ beam angles

- Nimh battery

- Correlated colour temperature of the LED-s typ. 5500k Max. 10000k

 

SE-6 technical light

- 1400 Lumen emitter output

- 4.8 ah battery capacity

- 240 min burn time

- Maximal depth rating: 100metres

- weight: 2.1 kg

- 6ْ beam angles

- Nimh battery

- Correlated colour temperature of the LED-s typ. 5500k Max. 10000k

The most typical trait of this light is the high lighting output which provides enough luminosity on every situation. Besides it has a long burn time and the small size for its output.

 

About our lights and battery pack

The lights

In our lights we mainly use LED-s as luminous sources.

The advantages of the LED luminous sources

- High mechanical power, excellent watt/lumen rate. It assures under identical
mechanical output higher luminescence, its efficiency is better than he halogen lightbulbs’

- The current consumption is considerably less by this means the lighting is much longer.

- Long endurance, we take 25000 hours endurance by our used LED-s into account.

- High correlated colour temperature, (5500-10000k) which white colour is standing
closer to the natural light by this means the colour rendition will be better.

- Considerable insusceptibility against the mechanical effects (such as collision, dropping)

Throwing of our lights

In spite of the light background the high correlated colour temperature and the regular formed glory are good sensible.
The light heads are made with 10 degree reflector-mirror, nevertheless in spite of their scattering light,
they emit enough diffused light to that the diver will be able to see the environment around him.

In our diving lights there are Nimh powers which have got many advantages
whilst the traditional lead-gel storage batteries.

Higher energy-density, the capacity-transmission of the power is more optimal.
There is no memory effect, the battery is rechargeable at any time and you don’t need to wait until it runs down.
Lighter weight. The weight of the Nimh battery is the portion of the same capacity lead-gel storage battery.
Smaller size. Under the same capacity, the size of the lamp will be smaller.
In our lights the battery is interchangeable by the user. The same capacity is reachable just by
the manufacturer used or with that corresponding capacity battery.
The voltage of the is 1,2 V and its capacity is 2100 mah.
The Nimh batteries contain less harmful component which are damaging to the
environment not as the lead-gel storage batteries.
During the storage of the lights you must pull away the plugs.
During aeroplane transporting you must pull away the plugs.
The endurance of the battery is 800-1000 recharge cycle.
The loss of energy which is resulting from the ageing of the battery is during 3-400 recharge about 15-20%.
Attention! The total discharge of the battery is to be avoided, otherwise it can
irreversible impairing. The used batteries must handle as dangerous waste. Please do
not damage the environment, batteries must pass down in the appointed places.

The battery-tank

The battery-tank is made from high strength of plastic and complemented with corrosionresistant and acid- resistant belongings.
Its establishment is robust with its wall thickness which is more than 1centimetre, practically unbreakable.
The battery-tank do not leak even in case of damaging of the connecting cable.

The size of the battery-tank

SE-3	SE-3 Long	SE-6
Diameter: 76 millimetre	Diameter: 76 millimetre	Diameter: 78 millimetre
Length: 180 millimetre	Length: 250 millimetre	Length: 250 millimetre

By our lights we take the guarantee of this part of machine for its endurance.